added ipendpoint agents and VMs

scripts/influx/configure-tick-stack-vm.sh → scripts/influx/install-clmc-agent.sh

 #!/bin/bash
 #/////////////////////////////////////////////////////////////////////////
 #//
-#// (c) University of Southampton IT Innovation Centre, 2018
+#// (c) University of Southampton IT Innovation Centre, 2017
 #//
 #// Copyright in this software belongs to University of Southampton
 #// IT Innovation Centre of Gamma House, Enterprise Road,
@@ -18,17 +18,18 @@
 #// PURPOSE, except where stated in the Licence Agreement supplied with
 #// the software.
 #//
-#//      Created By :            Simon Crowle
-#//      Created Date :          03/11/2018
+#//      Created By :            Michael Boniface
+#//      Created Date :          13/12/2017
 #//      Created for Project :   FLAME
 #//
 #/////////////////////////////////////////////////////////////////////////
 
-echo Configuring TICK stack services...
+# Install telegraf
+wget https://dl.influxdata.com/telegraf/releases/telegraf_1.3.2-1_amd64.deb
+dpkg -i telegraf_1.3.2-1_amd64.deb
 
-# Configure Telegraf
-systemctl stop telegraf
-
-cp ./config/telegraf/telegraf.conf /etc/telegraf/
+# Copy configuration
+cp $1 /etc/telegraf/telegraf.conf
 
+# Start telegraf
 systemctl start telegraf
\ No newline at end of file

scripts/influx/install-tick-stack-vm.sh → scripts/influx/install-clmc-service.sh

@@ -32,10 +32,6 @@ dpkg -i influxdb_1.2.4_amd64.deb
 wget https://dl.influxdata.com/kapacitor/releases/kapacitor_1.3.1_amd64.deb
 dpkg -i kapacitor_1.3.1_amd64.deb
 
-# install Telegraf
-wget https://dl.influxdata.com/telegraf/releases/telegraf_1.3.2-1_amd64.deb
-dpkg -i telegraf_1.3.2-1_amd64.deb
-
 # install Chronograf
 wget https://dl.influxdata.com/chronograf/releases/chronograf_1.3.3.0_amd64.deb
 dpkg -i chronograf_1.3.3.0_amd64.deb
\ No newline at end of file

scripts/influx/install-tick-stack-docker-compose.sh

-#!/bin/bash
-#/////////////////////////////////////////////////////////////////////////
-#//
-#// (c) University of Southampton IT Innovation Centre, 2017
-#//
-#// Copyright in this software belongs to University of Southampton
-#// IT Innovation Centre of Gamma House, Enterprise Road,
-#// Chilworth Science Park, Southampton, SO16 7NS, UK.
-#//
-#// This software may not be used, sold, licensed, transferred, copied
-#// or reproduced in whole or in part in any manner or form or in or
-#// on any media by any person other than in accordance with the terms
-#// of the Licence Agreement supplied with the software, or otherwise
-#// without the prior written consent of the copyright owners.
-#//
-#// This software is distributed WITHOUT ANY WARRANTY, without even the
-#// implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
-#// PURPOSE, except where stated in the Licence Agreement supplied with
-#// the software.
-#//
-#//      Created By :            Michael Boniface
-#//      Created Date :          13/12/2017
-#//      Created for Project :   FLAME
-#//
-#/////////////////////////////////////////////////////////////////////////
-
-# install docker
-apt-get -y update
-apt-get -y install apt-transport-https ca-certificates curl software-properties-common
-curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add -
-add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
-apt-get -y update
-apt-get install docker-ce
-
-# to get a specific version look at the cache and run the install with that version
-# apt-cache madison docker-ce
-# apt-get install docker-ce=<VERSION>
-
-# test docker
-# docker run hello-world
-
-# install docker compose
-curl -L https://github.com/docker/compose/releases/download/1.17.0/docker-compose-`uname -s`-`uname -m` -o /usr/local/bin/docker-compose
-chmod +x /usr/local/bin/docker-compose
-# test compose
-docker-compose version 1.17.0, build 1719ceb
-
-# install tick stack
-git clone https://github.com/influxdata/TICK-docker.git /opt
-cd /opt/TICK-docker/1.3
-docker-compose up -d

scripts/influx/start-tick-stack-services.sh → scripts/influx/start-clmc-service.sh

@@ -28,8 +28,4 @@ echo Starting TICK stack services...
 
 systemctl start influxdb
 systemctl start kapacitor
-#systemctl start telegraf
-systemctl start chronograf
+systemctl start chronograf
\ No newline at end of file
-
-# test influx
-#curl "http://localhost:8086/query?q=show+databases"
\ No newline at end of file

scripts/influx/start-telegraf.sh

-#!/bin/bash
-#/////////////////////////////////////////////////////////////////////////
-#//
-#// (c) University of Southampton IT Innovation Centre, 2018
-#//
-#// Copyright in this software belongs to University of Southampton
-#// IT Innovation Centre of Gamma House, Enterprise Road,
-#// Chilworth Science Park, Southampton, SO16 7NS, UK.
-#//
-#// This software may not be used, sold, licensed, transferred, copied
-#// or reproduced in whole or in part in any manner or form or in or
-#// on any media by any person other than in accordance with the terms
-#// of the Licence Agreement supplied with the software, or otherwise
-#// without the prior written consent of the copyright owners.
-#//
-#// This software is distributed WITHOUT ANY WARRANTY, without even the
-#// implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
-#// PURPOSE, except where stated in the Licence Agreement supplied with
-#// the software.
-#//
-#//      Created By :            Simon Crowle
-#//      Created Date :          03/11/2018
-#//      Created for Project :   FLAME
-#//
-#/////////////////////////////////////////////////////////////////////////
-
-echo Starting Telegraf services...
-systemctl start telegraf
\ No newline at end of file

scripts/influx/telegraf.conf → scripts/influx/telegraf_ipendpoint1.conf

@@ -11,9 +11,12 @@
 
 # Global tags can be specified here in key="value" format.
 [global_tags]
-  # dc = "us-east-1" # will tag all metrics with dc=us-east-1
-  # rack = "1a"
-  auth = "IT-Inn"
+  location="DC1"
+  sfc="MS_Template_1"
+  sfc_i="MS_I1"
+  sf="adaptive_streaming"
+  sf_i="adaptive_streaming_I1"
+  ipendpoint="adaptive_streaming_I1_ipendpoint1"
 
 # Configuration for telegraf agent
 [agent]
@@ -65,7 +68,7 @@
   # Multiple urls can be specified but it is assumed that they are part of the same
   # cluster, this means that only ONE of the urls will be written to each interval.
   # urls = ["udp://127.0.0.1:8089"] # UDP endpoint example
-  urls = ["http://localhost:8086"] # required
+  urls = ["http://192.168.50.10:8086"] # required
   # The target database for metrics (telegraf will create it if not exists)
   database = "CLMCMetrics" # required
   # Precision of writes, valid values are "ns", "us" (or "µs"), "ms", "s", "m", "h".
@@ -95,15 +98,6 @@
 ###############################################################################
 #                                  INPUTS                                     #
 ###############################################################################
-# Read metrics about cpu usage
-[[inputs.cpu]]
-  ## Whether to report per-cpu stats or not
-  percpu = true
-  ## Whether to report total system cpu stats or not
-  totalcpu = true
-  ## If true, collect raw CPU time metrics.
-  collect_cpu_time = false
-
 # # Influx HTTP write listener
 [[inputs.http_listener]]
   ## Address and port to host HTTP listener on

scripts/influx/telegraf_ipendpoint2.conf

+# Telegraf configuration
+
+# Telegraf is entirely plugin driven. All metrics are gathered from the
+# declared inputs, and sent to the declared outputs.
+
+# Plugins must be declared in here to be active.
+# To deactivate a plugin, comment out the name and any variables.
+
+# Use 'telegraf -config telegraf.conf -test' to see what metrics a config
+# file would generate.
+
+# Global tags can be specified here in key="value" format.
+[global_tags]
+  location="DC2"
+  sfc="MS_Template_1"
+  sfc_i="MS_I1"
+  sf="adaptive_streaming"
+  sf_i="adaptive_streaming_I1"
+  ipendpoint="adaptive_streaming_I1_ipendpoint2"
+
+# Configuration for telegraf agent
+[agent]
+  ## Default data collection interval for all inputs
+  interval = "10s"
+  ## Rounds collection interval to 'interval'
+  ## ie, if interval="10s" then always collect on :00, :10, :20, etc.
+  round_interval = true
+
+  ## Telegraf will cache metric_buffer_limit metrics for each output, and will
+  ## flush this buffer on a successful write.
+  metric_buffer_limit = 1000
+  ## Flush the buffer whenever full, regardless of flush_interval.
+  flush_buffer_when_full = true
+
+  ## Collection jitter is used to jitter the collection by a random amount.
+  ## Each plugin will sleep for a random time within jitter before collecting.
+  ## This can be used to avoid many plugins querying things like sysfs at the
+  ## same time, which can have a measurable effect on the system.
+  collection_jitter = "0s"
+
+  ## Default flushing interval for all outputs. You shouldn't set this below
+  ## interval. Maximum flush_interval will be flush_interval + flush_jitter
+  flush_interval = "10s"
+  ## Jitter the flush interval by a random amount. This is primarily to avoid
+  ## large write spikes for users running a large number of telegraf instances.
+  ## ie, a jitter of 5s and interval 10s means flushes will happen every 10-15s
+  flush_jitter = "0s"
+
+  ## Logging configuration:
+  ## Run telegraf in debug mode
+  debug = false
+  ## Run telegraf in quiet mode
+  quiet = false
+  ## Specify the log file name. The empty string means to log to stdout.
+  logfile = "G:/Telegraf/telegraf.log"
+
+  ## Override default hostname, if empty use os.Hostname()
+  hostname = ""
+
+
+###############################################################################
+#                                  OUTPUTS                                    #
+###############################################################################
+
+# Configuration for influxdb server to send metrics to
+[[outputs.influxdb]]
+  # The full HTTP or UDP endpoint URL for your InfluxDB instance.
+  # Multiple urls can be specified but it is assumed that they are part of the same
+  # cluster, this means that only ONE of the urls will be written to each interval.
+  # urls = ["udp://127.0.0.1:8089"] # UDP endpoint example
+  urls = ["http://192.168.50.10:8086"] # required
+  # The target database for metrics (telegraf will create it if not exists)
+  database = "CLMCMetrics" # required
+  # Precision of writes, valid values are "ns", "us" (or "µs"), "ms", "s", "m", "h".
+  # note: using second precision greatly helps InfluxDB compression
+  precision = "s"
+
+  ## Write timeout (for the InfluxDB client), formatted as a string.
+  ## If not provided, will default to 5s. 0s means no timeout (not recommended).
+  timeout = "5s"
+  # username = "telegraf"
+  # password = "metricsmetricsmetricsmetrics"
+  # Set the user agent for HTTP POSTs (can be useful for log differentiation)
+  # user_agent = "telegraf"
+  # Set UDP payload size, defaults to InfluxDB UDP Client default (512 bytes)
+  # udp_payload = 512
+[[outputs.file]]
+  ## Files to write to, "stdout" is a specially handled file.
+  files = ["stdout", "/tmp/metrics.out"]
+
+  ## Data format to output.
+  ## Each data format has its own unique set of configuration options, read
+  ## more about them here:
+  ## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_OUTPUT.md
+  data_format = "influx"
+
+
+###############################################################################
+#                                  INPUTS                                     #
+###############################################################################
+# # Influx HTTP write listener
+[[inputs.http_listener]]
+  ## Address and port to host HTTP listener on
+  service_address = ":8186"
+
+  ## timeouts
+  read_timeout = "10s"
+  write_timeout = "10s"
+
+  ## HTTPS
+  #tls_cert= "/etc/telegraf/cert.pem"
+  #tls_key = "/etc/telegraf/key.pem"
+
+  ## MTLS
+  #tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]
+  
\ No newline at end of file