diff --git a/hdl/src/wrapper_vr_loopback.sv b/hdl/src/wrapper_vr_loopback.sv
new file mode 100644
index 0000000000000000000000000000000000000000..f238d79d4546d11c22db261ab0843a1cf0467ecb
--- /dev/null
+++ b/hdl/src/wrapper_vr_loopback.sv
@@ -0,0 +1,270 @@
+//-----------------------------------------------------------------------------
+// SoC Labs Basic Wrapper Source
+// - Valid-Ready Loopback example connecting packet constructor to deconstructor
+// A joint work commissioned on behalf of SoC Labs; under Arm Academic Access license.
+//
+// Contributors
+//
+// David Mapstone (d.a.mapstone@soton.ac.uk)
+//
+// Copyright 2023; SoC Labs (www.soclabs.org)
+//-----------------------------------------------------------------------------
+//-----------------------------------------------------------------------------
+// The confidential and proprietary information contained in this file may
+// only be used by a person authorised under and to the extent permitted
+// by a subsisting licensing agreement from Arm Limited or its affiliates.
+//
+// (C) COPYRIGHT 2010-2011 Arm Limited or its affiliates.
+// ALL RIGHTS RESERVED
+//
+// This entire notice must be reproduced on all copies of this file
+// and copies of this file may only be made by a person if such person is
+// permitted to do so under the terms of a subsisting license agreement
+// from Arm Limited or its affiliates.
+//
+// SVN Information
+//
+// Checked In : $Date: 2017-10-10 15:55:38 +0100 (Tue, 10 Oct 2017) $
+//
+// Revision : $Revision: 371321 $
+//
+// Release Information : Cortex-M System Design Kit-r1p1-00rel0
+//
+//-----------------------------------------------------------------------------
+//-----------------------------------------------------------------------------
+// Abstract : AHB-lite example slave, support 4 32-bit register read and write,
+// each register can be accessed by byte, half word or word.
+// The example slave always output ready and OKAY response to the master
+//-----------------------------------------------------------------------------
+`timescale 1ns/1ns
+`include "wrapper_packet_construct.sv"
+`include "wrapper_packet_deconstruct.sv"
+`include "wrapper_ahb_interface.sv"
+
+module wrapper_vr_loopback #(
+ parameter ADDRWIDTH=12 // Peripheral Address Width
+ )(
+ input logic HCLK, // Clock
+ input logic HRESETn, // Reset
+
+ // AHB connection to Initiator
+ input logic HSELS,
+ input logic [ADDRWIDTH-1:0] HADDRS,
+ input logic [1:0] HTRANSS,
+ input logic [2:0] HSIZES,
+ input logic HWRITES,
+ input logic HREADYS,
+ input logic [31:0] HWDATAS,
+
+ output logic HREADYOUTS,
+ output logic HRESPS,
+ output logic [31:0] HRDATAS
+ );
+
+
+ // ----------------------------------------
+ // Internal wires declarations
+
+ // Register module interface signals
+ logic [ADDRWIDTH-1:0] in_buf_addr;
+ logic in_buf_read_en;
+ logic in_buf_write_en;
+ logic [3:0] in_buf_byte_strobe;
+ logic [31:0] in_buf_wdata;
+ logic [31:0] in_buf_rdata;
+
+ // Input Port Wire Declarations
+ logic [ADDRWIDTH-2:0] input_addr;
+ logic input_read_en;
+ logic input_write_en;
+ logic [3:0] input_byte_strobe;
+ logic [31:0] input_wdata;
+ logic [31:0] input_rdata;
+ logic input_wready;
+ logic input_rready;
+
+ // Output Port Wire Declarations
+ logic [ADDRWIDTH-2:0] output_addr;
+ logic output_read_en;
+ logic output_write_en;
+ logic [3:0] output_byte_strobe;
+ logic [31:0] output_wdata;
+ logic [31:0] output_rdata;
+ logic output_wready;
+ logic output_rready;
+
+ // Internal Wiring
+ logic [511:0] packet_data_out;
+ logic packet_data_out_last;
+ logic packet_data_out_valid;
+ logic packet_data_out_ready;
+
+ // Internal Wiring
+ logic [511:0] packet_data_in;
+ logic packet_data_in_last;
+ logic packet_data_in_valid;
+ logic packet_data_in_ready;
+
+ // Test Wire Assignments
+ assign packet_data_in = packet_data_out;
+ assign packet_data_in_last = packet_data_out_last;
+ assign packet_data_in_valid = packet_data_out_valid;
+ assign packet_data_out_ready = packet_data_in_ready;
+ //-----------------------------------------------------------
+ // Module logic start
+ //----------------------------------------------------------
+
+ // Interface block to convert AHB transfers to Register transfers to engine input/output channels
+ // engine Input/Output Channels
+ wrapper_ahb_interface #(
+ ADDRWIDTH
+ ) u_wrapper_ahb_interface (
+ .hclk (HCLK),
+ .hresetn (HRESETn),
+
+ // Input slave port: 32 bit data bus interface
+ .hsels (HSELS),
+ .haddrs (HADDRS),
+ .htranss (HTRANSS),
+ .hsizes (HSIZES),
+ .hwrites (HWRITES),
+ .hreadys (HREADYS),
+ .hwdatas (HWDATAS),
+
+ .hreadyouts (HREADYOUTS),
+ .hresps (HRESPS),
+ .hrdatas (HRDATAS),
+
+ // Register interface - Accelerator Engine Input
+ .input_addr (input_addr),
+ .input_read_en (input_read_en),
+ .input_write_en (input_write_en),
+ .input_byte_strobe (input_byte_strobe),
+ .input_wdata (input_wdata),
+ .input_rdata (input_rdata),
+ .input_wready (input_wready),
+ .input_rready (input_rready),
+
+ // Register interface - Accelerator Engine Output
+ .output_addr (output_addr),
+ .output_read_en (output_read_en),
+ .output_write_en (output_write_en),
+ .output_byte_strobe (output_byte_strobe),
+ .output_wdata (output_wdata),
+ .output_rdata (output_rdata),
+ .output_wready (output_wready),
+ .output_rready (output_rready)
+ );
+
+ wrapper_packet_construct #(
+ (ADDRWIDTH - 1), // Only half address map allocated to this device
+ 512 // Packet Width
+ ) u_wrapper_packet_construct (
+ .hclk (HCLK),
+ .hresetn (HRESETn),
+
+ // Register interface
+ .addr (input_addr),
+ .read_en (input_read_en),
+ .write_en (input_write_en),
+ .byte_strobe (input_byte_strobe),
+ .wdata (input_wdata),
+ .rdata (input_rdata),
+ .wready (input_wready),
+ .rready (input_rready),
+
+ // Valid/Ready Interface
+ .data_out (packet_data_out),
+ .data_out_last (packet_data_out_last),
+ .data_out_valid (packet_data_out_valid),
+ .data_out_ready (packet_data_out_ready)
+ );
+
+ wrapper_packet_deconstruct #(
+ (ADDRWIDTH - 1), // Only half address map allocated to this device
+ 512 // Ouptut Packet WIdth
+ ) u_wrapper_packet_deconstruct (
+ .hclk (HCLK),
+ .hresetn (HRESETn),
+
+ // Register interface
+ .addr (output_addr),
+ .read_en (output_read_en),
+ .write_en (output_write_en),
+ .byte_strobe (output_byte_strobe),
+ .wdata (output_wdata),
+ .rdata (output_rdata),
+ .wready (output_wready),
+ .rready (output_rready),
+
+ // Valid/Ready Interface
+ .data_in (packet_data_in),
+ .data_in_last (packet_data_in_last),
+ .data_in_valid (packet_data_in_valid),
+ .data_in_ready (packet_data_in_ready)
+ );
+
+ //-----------------------------------------------------------
+ //Module logic end
+ //----------------------------------------------------------
+
+ //---------------------
+ //Test Logic
+ //---------------------
+ // assign data_out_ready = 1'b1;
+ // assign output_wready = 1'b1;
+ // assign output_rready = 1'b1;
+ // assign output_wready = 1'b1;
+ // assign output_rready = 1'b1;
+`ifdef ARM_AHB_ASSERT_ON
+
+ `include "std_ovl_defines.h"
+ // ------------------------------------------------------------
+ // Assertions
+ // ------------------------------------------------------------
+
+ logic ovl_trans_req = HREADYS & HSELS & HTRANSS[1];
+
+ // Check the reg_write_en signal generated
+ assert_next
+ #(`OVL_ERROR, 1,1,0,
+ `OVL_ASSERT,
+ "Error! register write signal was not generated! "
+ )
+ u_ovl_ahb_eg_slave_reg_write
+ (.clk ( HCLK ),
+ .reset_n (HRESETn),
+ .start_event ((ovl_trans_req & HWRITES)),
+ .test_expr (reg_write_en == 1'b1)
+ );
+
+
+ // Check the reg_read_en signal generated
+ assert_next
+ #(`OVL_ERROR, 1,1,0,
+ `OVL_ASSERT,
+ "Error! register read signal was not generated! "
+ )
+ u_ovl_ahb_eg_slave_reg_read
+ (.clk ( HCLK ),
+ .reset_n (HRESETn),
+ .start_event ((ovl_trans_req & (~HWRITES))),
+ .test_expr (reg_read_en == 1'b1)
+ );
+
+
+
+ // Check register read and write operation won't assert at the same cycle
+ assert_never
+ #(`OVL_ERROR,
+ `OVL_ASSERT,
+ "Error! register read and write active at the same cycle!")
+ u_ovl_ahb_eg_slave_rd_wr_illegal
+ (.clk(HCLK),
+ .reset_n(HRESETn),
+ .test_expr((reg_write_en & reg_read_en))
+ );
+
+`endif
+
+endmodule
\ No newline at end of file
diff --git a/hdl/verif/tb_wrapper_vr_loopback.sv b/hdl/verif/tb_wrapper_vr_loopback.sv
new file mode 100644
index 0000000000000000000000000000000000000000..ad81a0e8e8f1dfb3d498528c7fdfc6534cf558b6
--- /dev/null
+++ b/hdl/verif/tb_wrapper_vr_loopback.sv
@@ -0,0 +1,260 @@
+//-----------------------------------------------------------------------------
+// SoC Labs Basic Testbench for Top-level AHB Wrapper
+// Modified from tb_frbm_example.v
+// A joint work commissioned on behalf of SoC Labs; under Arm Academic Access license.
+//
+// Contributors
+//
+// David Mapstone (d.a.mapstone@soton.ac.uk)
+//
+// Copyright 2023; SoC Labs (www.soclabs.org)
+//-----------------------------------------------------------------------------
+//-----------------------------------------------------------------------------
+// The confidential and proprietary information contained in this file may
+// only be used by a person authorised under and to the extent permitted
+// by a subsisting licensing agreement from Arm Limited or its affiliates.
+//
+// (C) COPYRIGHT 2010-2011,2017 Arm Limited or its affiliates.
+// ALL RIGHTS RESERVED
+//
+// This entire notice must be reproduced on all copies of this file
+// and copies of this file may only be made by a person if such person is
+// permitted to do so under the terms of a subsisting license agreement
+// from Arm Limited or its affiliates.
+//
+// SVN Information
+//
+// Checked In : $Date: 2017-10-10 15:55:38 +0100 (Tue, 10 Oct 2017) $
+//
+// Revision : $Revision: 371321 $
+//
+// Release Information : Cortex-M System Design Kit-r1p1-00rel0
+//
+//-----------------------------------------------------------------------------
+//-------------------------------------------------------------------------
+// Abstract : Example for File Reader Bus Master
+// Testbench for the example AHB Lite slave.
+//=========================================================================--
+`include "cmsdk_ahb_filereadcore.v"
+`include "cmsdk_ahb_fileread_funnel.v"
+`include "cmsdk_ahb_fileread_master32.v"
+`include "cmsdk_ahb_default_slave.v"
+`include "cmsdk_ahb_slave_mux.v"
+`include "wrapper_vr_loopback.sv"
+
+`timescale 1ns/1ps
+
+module tb_wrapper_vr_loopback;
+
+parameter CLK_PERIOD = 10;
+parameter ADDRWIDTH = 12;
+
+// parameter InputFileName = "ahb_input_hash_stim.m2d";
+parameter InputFileName = ("../stimulus/ahb_input_hash_stim.m2d");
+parameter MessageTag = "FileReader:";
+parameter StimArraySize = 10000;
+
+
+//********************************************************************************
+// Internal Wires
+//********************************************************************************
+
+// AHB Lite BUS SIGNALS
+wire hready;
+wire hresp;
+wire [31:0] hrdata;
+
+wire [1:0] htrans;
+wire [2:0] hburst;
+wire [3:0] hprot;
+wire [2:0] hsize;
+wire hwrite;
+wire hmastlock;
+wire [31:0] haddr;
+wire [31:0] hwdata;
+
+// Accelerator AHB Signals
+wire hsel0;
+wire hreadyout0;
+wire hresp0;
+wire [31:0] hrdata0;
+
+// Default Slave AHB Signals
+wire hsel1;
+wire hreadyout1;
+wire hresp1;
+wire [31:0] hrdata1;
+
+reg HCLK;
+reg HRESETn;
+
+//********************************************************************************
+// Clock and reset generation
+//********************************************************************************
+
+initial
+ begin
+ $dumpfile("wrapper_vr_loopback.vcd");
+ $dumpvars(0, tb_wrapper_vr_loopback);
+ HRESETn = 1'b0;
+ HCLK = 1'b0;
+ # (10*CLK_PERIOD);
+ HRESETn = 1'b1;
+ end
+
+always
+ begin
+ HCLK = #(CLK_PERIOD/2) ~HCLK;
+ end
+
+
+//********************************************************************************
+// Address decoder, need to be changed for other configuration
+//********************************************************************************
+// 0x60010000 - 0x60010FFF : HSEL #0 - Hash Accelerator
+// Other addresses : HSEL #1 - Default slave
+
+ assign hsel0 = (haddr[31:12] == 20'h60010)? 1'b1:1'b0;
+ assign hsel1 = hsel0 ? 1'b0:1'b1;
+
+//********************************************************************************
+// File read bus master:
+// generate AHB Master signal by reading a file which store the AHB Operations
+//********************************************************************************
+
+cmsdk_ahb_fileread_master32 #(InputFileName,
+ MessageTag,
+ StimArraySize
+) u_ahb_fileread_master32 (
+ .HCLK (HCLK),
+ .HRESETn (HRESETn),
+
+ .HREADY (hready),
+ .HRESP ({hresp}), //AHB Lite response to AHB response
+ .HRDATA (hrdata),
+ .EXRESP (1'b0), // Exclusive response (tie low if not used)
+
+
+ .HTRANS (htrans),
+ .HBURST (hburst),
+ .HPROT (hprot),
+ .EXREQ (), // Exclusive access request (not used)
+ .MEMATTR (), // Memory attribute (not used)
+ .HSIZE (hsize),
+ .HWRITE (hwrite),
+ .HMASTLOCK (hmastlock),
+ .HADDR (haddr),
+ .HWDATA (hwdata),
+
+ .LINENUM ()
+
+ );
+
+
+//********************************************************************************
+// Slave multiplexer module:
+// multiplex the slave signals to master, three ports are enabled
+//********************************************************************************
+
+ cmsdk_ahb_slave_mux #(
+ 1, //PORT0_ENABLE
+ 1, //PORT1_ENABLE
+ 1, //PORT2_ENABLE
+ 0, //PORT3_ENABLE
+ 0, //PORT4_ENABLE
+ 0, //PORT5_ENABLE
+ 0, //PORT6_ENABLE
+ 0, //PORT7_ENABLE
+ 0, //PORT8_ENABLE
+ 0 //PORT9_ENABLE
+ ) u_ahb_slave_mux (
+ .HCLK (HCLK),
+ .HRESETn (HRESETn),
+ .HREADY (hready),
+ .HSEL0 (hsel0), // Input Port 0
+ .HREADYOUT0 (hreadyout0),
+ .HRESP0 (hresp0),
+ .HRDATA0 (hrdata0),
+ .HSEL1 (hsel1), // Input Port 1
+ .HREADYOUT1 (hreadyout1),
+ .HRESP1 (hresp1),
+ .HRDATA1 (hrdata1),
+ .HSEL2 (1'b0), // Input Port 2
+ .HREADYOUT2 (),
+ .HRESP2 (),
+ .HRDATA2 (),
+ .HSEL3 (1'b0), // Input Port 3
+ .HREADYOUT3 (),
+ .HRESP3 (),
+ .HRDATA3 (),
+ .HSEL4 (1'b0), // Input Port 4
+ .HREADYOUT4 (),
+ .HRESP4 (),
+ .HRDATA4 (),
+ .HSEL5 (1'b0), // Input Port 5
+ .HREADYOUT5 (),
+ .HRESP5 (),
+ .HRDATA5 (),
+ .HSEL6 (1'b0), // Input Port 6
+ .HREADYOUT6 (),
+ .HRESP6 (),
+ .HRDATA6 (),
+ .HSEL7 (1'b0), // Input Port 7
+ .HREADYOUT7 (),
+ .HRESP7 (),
+ .HRDATA7 (),
+ .HSEL8 (1'b0), // Input Port 8
+ .HREADYOUT8 (),
+ .HRESP8 (),
+ .HRDATA8 (),
+ .HSEL9 (1'b0), // Input Port 9
+ .HREADYOUT9 (),
+ .HRESP9 (),
+ .HRDATA9 (),
+
+ .HREADYOUT (hready), // Outputs
+ .HRESP (hresp),
+ .HRDATA (hrdata)
+ );
+
+
+//********************************************************************************
+// Slave module 1: example AHB slave module
+//********************************************************************************
+ wrapper_vr_loopback #(ADDRWIDTH
+ ) accelerator (
+ .HCLK (HCLK),
+ .HRESETn (HRESETn),
+
+ // Input slave port: 32 bit data bus interface
+ .HSELS (hsel0),
+ .HADDRS (haddr[ADDRWIDTH-1:0]),
+ .HTRANSS (htrans),
+ .HSIZES (hsize),
+ .HWRITES (hwrite),
+ .HREADYS (hready),
+ .HWDATAS (hwdata),
+
+ .HREADYOUTS (hreadyout0),
+ .HRESPS (hresp0),
+ .HRDATAS (hrdata0)
+
+ );
+
+
+//********************************************************************************
+// Slave module 2: AHB default slave module
+//********************************************************************************
+ cmsdk_ahb_default_slave u_ahb_default_slave(
+ .HCLK (HCLK),
+ .HRESETn (HRESETn),
+ .HSEL (hsel1),
+ .HTRANS (htrans),
+ .HREADY (hready),
+ .HREADYOUT (hreadyout1),
+ .HRESP (hresp1)
+ );
+
+ assign hrdata1 = {32{1'b0}}; // Default slave don't have data
+
+ endmodule
\ No newline at end of file