diff --git a/source/lib/uart_drv/uart_drv.c b/source/lib/uart_drv/uart_drv.c
index a9ad62665af6181b535147bab269348c879750c4..fceb4be71c84ca1f8b1a7a113a629414a2276f50 100644
--- a/source/lib/uart_drv/uart_drv.c
+++ b/source/lib/uart_drv/uart_drv.c
@@ -460,13 +460,9 @@ void hal_uart_init(void)
 	rx_end_of_str = NO_END_OF_LINE_DETECTED;
 	rx_str_length = 0;
 
-<<<<<<< Updated upstream
-	UART_PORT_SEL |= UART_PIN_RXD + UART_PIN_TXD;
-=======
     //Due to 3 peripherals per port there are more select bits.
     UART_PORT_SEL0 |= UART_PIN_RXD + UART_PIN_TXD;
     UART_PORT_SEL1 &= ~(UART_PIN_RXD + UART_PIN_TXD);
->>>>>>> Stashed changes
 	UART_PORT_DIR |= UART_PIN_TXD;
 	UART_PORT_DIR &= ~UART_PIN_RXD;
 
@@ -493,12 +489,8 @@ void hal_uart_init(void)
 	UCA1BR0 = 138;                              // 115200 bits per second
 	UCA1BR1 = 0;
 
-<<<<<<< Updated upstream
-	UCA1MCTL = UCBRS2 + UCBRS1 + UCBRS0;        // Modulation UCBRSx = 7
-=======
 	//Slight different modulation options in FR5994
 	UCA0MCTLW = UCBRS2 + UCBRS1 + UCBRS0;
->>>>>>> Stashed changes
 	UCA1CTL1 &= ~UCSWRST;
 
 	UCA1IE |= UCRXIE;                           // Enable USCI_A0 RX interrupt
@@ -519,86 +511,13 @@ void hal_uart_deinit(void)
 	UCA1IE &= ~UCRXIE;
 	UCA1IE &= ~UCTXIE;
 	UCA1CTL1 = UCSWRST;                          //Reset State
-<<<<<<< Updated upstream
-	UART_PORT_SEL &= ~( UART_PIN_RXD + UART_PIN_TXD );
-=======
 	//Due to 3 peripherals per port there are more select bits.
 	UART_PORT_SEL0 &= ~( UART_PIN_RXD + UART_PIN_TXD);
 	UART_PORT_SEL1 &= ~( UART_PIN_RXD + UART_PIN_TXD);
->>>>>>> Stashed changes
 	UART_PORT_DIR |= UART_PIN_TXD;
 	UART_PORT_DIR |= UART_PIN_RXD;
 	UART_PORT_OUT &= ~(UART_PIN_TXD + UART_PIN_RXD);
 }
-<<<<<<< Updated upstream
-
-/**************************************************************************
- * @brief  void hal_uart_start_tx(void)
- *
- * @param  Start the TX ISR, it will automatically stop when FIFO is empty
- *
- * @return none
- **************************************************************************/
-void hal_uart_start_tx(void)
-{
-
-	if(isr_state == TX_ISR_OFF) {
-		ENTER_CRITICAL_SECTION(isr_flag);
-		isr_state = TX_ISR_ON;
-		UCA1IE |= UCTXIE;
-		UCA1TXBUF = circ_buf_get_data(&uart_tx_buf);
-		LEAVE_CRITICAL_SECTION(isr_flag);
-	}
-}
-
-// Echo back RXed character, confirm TX buffer is ready first
-#if defined(__TI_COMPILER_VERSION__) || defined(__IAR_SYSTEMS_ICC__)
-#pragma vector=USCI_A1_VECTOR
-__interrupt void USCI_A1_ISR(void)
-#elif defined(__GNUC__)
-void __attribute__ ((interrupt(USCI_A1_VECTOR))) USCI_A1_ISR (void)
-#else
-#error Compiler not supported!
-#endif
-{
-	char tmp_uart_data;
-	switch(__even_in_range(UCA1IV,4))
-	{
-	case USCI_NONE:
-		break;                             // Vector 0 - no interrupt
-	case USCI_UCRXIFG:                                   // Vector 2 - RXIFG
-		tmp_uart_data = UCA1RXBUF;
-
-		circ_buf_put_data(&uart_rx_buf, tmp_uart_data);
-
-		if(uart_state == UART_ECHO_ON) {
-			uart_put_char(tmp_uart_data);
-		}
-		// if its a "return" then activate main-loop
-		if(tmp_uart_data == 13) {
-			rx_end_of_str = END_OF_LINE_DETECTED;
-			rx_str_length = uart_rx_buf.size_of_buffer - circ_buf_remainder(&uart_rx_buf);
-			__bic_SR_register_on_exit(LPM3_bits);
-		}
-		break;
-	case USCI_UCTXIFG:
-		// check if there is more data to send
-		if(circ_buf_remainder(&uart_tx_buf) < uart_tx_buf.size_of_buffer) {
-			UCA1TXBUF = circ_buf_get_data(&uart_tx_buf);
-		} else {
-			isr_state = TX_ISR_OFF;
-			UCA1IE &= ~UCTXIE;                        // Disable USCI_A0 TX interrupt
-		}
-		break;                             // Vector 4 - TXIFG
-	default:
-		break;
-	}
-}
-
-#elif UART_SER_INTF == F2_UART_INTF_USCIA0        // Interface to UART
-
-/**************************************************************************
-=======
 
 /**************************************************************************
  * @brief  void hal_uart_start_tx(void)
@@ -666,7 +585,6 @@ void __attribute__ ((interrupt(USCI_A1_VECTOR))) USCI_A1_ISR (void)
 #elif UART_SER_INTF == F2_UART_INTF_USCIA0        // Interface to UART
 
 /**************************************************************************
->>>>>>> Stashed changes
  * @brief  Initializes the serial communications peripheral and GPIO ports
  *         to communicate with the TUSB3410.
  *