diff --git a/main.c b/main.c index 4911d2fd39bf211f817adc03cc4cfe9c18f690df..969052a521a4658f430ebee714710efbad3e45ed 100644 --- a/main.c +++ b/main.c @@ -7,17 +7,19 @@ #include "lib/fonts.h" #include "lib/st7735.h" -//this task covers how to use the on-board temperature sensor in the RP2040 chip on the Raspberry pi Pico -//it uses the analogue to digital converter (ADC) in the Pico to read the internal temperature of the RP2040 and -//does the necessary data conversion to output the temperature of the chip - -//also covers how to perform the required data processing to take the raw ADC output and convert it -//into a voltage and then into temperature - -//the temperature sensor might not be calibrated so temperatures might differ in different -//boards due to manufacturing inconsistencies -//as such, if you will be using this in a serious project that requires an accurate temperature value, -//I would recommend using an external sensor. +/* +this task covers how to use the on-board temperature sensor in the RP2040 chip on the Raspberry pi Pico +it uses the analogue to digital converter (ADC) in the Pico to read the internal temperature of the RP2040 and +does the necessary data conversion to output the temperature of the chip + +also covers how to perform the required data processing to take the raw ADC output and convert it +into a voltage and then into temperature + +the temperature sensor might not be calibrated so temperatures might differ in different +boards due to manufacturing inconsistencies +as such, if you will be using this in a serious project that requires an accurate temperature value, +I would recommend using an external sensor. +*/ int main() {